DK160 Turf Aercore

DKl60 is a tractor-mounted three-pointdrilling machine. Powered by the tractor’sPTO.

The working width is 1.6 meters, and themaximum drilling depth is 250mm.

Both solid and hollows needles are optional

Introduction

DKl60 is a tractor-mounted three-pointdrilling machine. Powered by the tractor’sPTO.

The working width is 1.6 meters, and themaximum drilling depth is 250mm.

Both solid and hollows needles are optional

Model	DK160
Brand	KASHIN
Working width	63°(1.60 m)
Working Depth	Up to 10″ (250 mm)
Tractor Speed @ 500 Rev’ s at PTO	–
Spacing 2.5” (65 mm)	Up to 0.60 mph (1.00 kph)
Spacing 4″(100 mm)	Up to 1.00 mph (1.50 kph)
Spacing 6.5 (165 mm)	Up to 1.60 mph (2.50 kph)
Maximum PTO speed	Up to 720 rpm
Weight	550 kg
Hole Spacing Side-to-Side	4”(100 mm) @ 0.75”(18 mm) holes
	2.5″ (65 mm) @ 0.50″ (12 mm) holes
Hole Spacing in Driving Direction	1 -6,5”(25 -165 mm)
Recommended Tractor Size	40 hp, with minimum lift capacity of 600kg
Maximum Tine Size	Solid 0.75″ x 10″ (18 mm x 250 mm)
	Hollow 1″ x 10″ (25 mm x 250 mm)
Three Point Linkage	3-point CAT 1
Srandard ltems	-Set solid tines to 0.50″ x 10″(12 mm x 250 mm)
	-Front and rear roller
	-3-shuttle gearbox